The Quest for the Perfect Judo Floor
by Paul Nogaki
Our Judo club decided to re-do our floors after we noticed the foam under our tatami was starting to break down and our surface was becoming uneven and falls were starting to hurt more and more especially to us adults
In our quest for the “perfect” Judo floor, I started to do some research. I had the “let’s do it right” attitude with budget constraints being a major concern. I ended up talking to two structural engineers, a kinesiology specialist, mat manufacturers, gymnastic floor manufacturers, gymnastic coaches and many Judoka on this subject. I must give special credit to James Carmer from Denver Judo who was extremely helpful as he was also doing research on this subject and was great help in the area of suppliers. We both came up with the same conclusion as to the ideal flooring system and surface for Judo. Great minds must think alike.
A mat or surface system will only compress a certain percentage of the material itself depending on its density if laid on a hard rigid surface such as a concrete floor. This often leads to injuries as the mat themselves can not absorb and dissipate the energy from a fall adequately. In Judo it is necessary to have a sub floor system that will deflect and absorb the impact of a 200 pound plus person falling from sometimes above the head heights such as when being thrown from a standing Kata-guruma (shoulder wheel throw). Simply laying foam under the mats as we have found was better than nothing but negated some of benefits of the tatami itself. The tatami itself sinks too much under weight slowing the playing surface down and worse yet; the corners of the mat would sink too much in relation to the mat next to it causing broken toes. Manufacturers of the tatami mats will tell you they are not designed to take the impact of a Judo throw on a concrete floor. Therefore a “sprung” floor is necessary so that the mats are not taking 100 percent of the impact and a fast, firm surface is still retained. As James Carmer mentions on his Denver Judo website, “This will mean longer careers in both our competition and recreational workout lives.”
I don’t think anyone will disagree that the tatami mats manufactured by Bridgestone, Swain, Gee, Zebra, etc. are the best surface for Judo. They are used in Olympic and International venues and are a great surface. I am not too familiar with the puzzle lock, air foam type mats but I have heard and seen favorable reviews for some of those systems also.
The sub flooring system which I will refer to as the floor system from this point on was our biggest challenge. The only truly sprung floors I have done Judo on are a hardwood floor mounted on progressive rate springs in Japan and the sprung floors using tires. Our first floor was a tire floor. The progressive rate spring floor was wonderful but ridiculously expensive. The cost estimate to do a floor this way is over $40 per square foot. The springs have a different compression and rebound rate which is very important. One thing I have found is that for a floor to dissipate the impact of a Judo fall efficiently, the compression rate of the floor must be much faster than the rebound rate. If the rebound rate is the same as the compression rate, then the floor system and the mats on top of the surface will only absorb a percentage of the impact as opposed to a floor with a slower rebound rate. Equal spring rate floors are great for basketball, gymnastics and volleyball but not Judo. This is the major inherit flaw with metal coil springs or tires. Using tires as springs poses other problems such as inconsistent spring rates causing hard or soft spots, soft corners, and the general feeling of being too bouncy. Tire floors would be okay if you were using all brand new tires of the same size and make, but how practical is that?
After numerous phone calls, emails and in person conversations and then more research; I came to the conclusion that a special polyethylene closed cell foam used in gymnastic flooring and specialized packaging had all the characteristics I was looking for. After numerous calculations were made, I had decided that 2.2 pounds per cubic foot density foam laid out in a pattern of 33 blocks per 4’ x 8’ sheet of ½ inch plywood was the way to go. The foam had the fast compression and slower rebound rate I was looking for. James Carmer gave me a great source for the foam. Of course the gymnastic flooring people didn’t want to reveal their source and offered to sell us the foam at a 5 time mark up. The foam blocks were glued to the sheets of plywood. Another layer of ½” plywood was placed on top with non over-lapping joints between the sheets. The top layer was screwed down to the bottom layer in essence creating a one piece quiet, rigid, non-creaking floor. We tried using Velcro to attach the layers of plywood to each other but we didn’t like the movement or creaking when we did.
Velcro was glued to the bottom of the border tatami mats and stapled to the plywood sheets. The mats are tight and do not move.
We are extremely pleased with the outcome. Even we old “geezers” are happy to take falls on our new floor. I am extremely grateful to all the advice I received from the numerous sources.
We’re gluing the 4”x4”x3” foam blocks to the sheets of ½” plywood. Notice the template on the left that was used for marking placement of the blocks. The girls were very helpful in getting the blocks into place.
Here is the plywood with the blocks being laid down with another layer of plywood on top of the first. The two layers are screwed together.
Here’s Dave the “screwman” with his power screw driver.
The sprung floor is completed. Now the tatami mats have to be put into place.
The border tatamis are velcroed onto the plywood. After two hard workouts the mats have not moved. We all love the new floor. Falling is now a dream.
Editor's note: For additional information and details about another installation of this mat system, please see http://www.mygaragedojo.blogspot.com
Last Updated on Friday, 24 June 2011 01:41